SHANGHAI--(BUSINESS WIRE)--May 23, 2016--Liquid gasketing sealants have been used for many years in automotive engineering as an alternative to solid gaskets. For instance, gasketing products suitable for flange sealing applications are deployed in engine construction and in the drive train generally. In addition to anaerobic-curing acrylates for high-rigidity flanges, RTV silicones and ?V a new development ?V polyacrylates that likewise cure at room temperature for sealing flexible flange connections are available. Nowadays products have to satisfy both performance specifications and increasingly sustainability criteria as well.
This Smart News Release features multimedia. View the full release here: http://www.businesswire.com/news/home/20160523005087/en/
Reliable gasketing systems are key to new engine development which today is geared not only to generating high performance with reduced fuel consumption and low CO2 emissions, but also to ever more compact dimensions. (Photo: Business Wire)
The purpose of all sealing systems in the automotive industry is to prevent leakage and thus avoid the dreaded "oil patch under the car." The sealing process is performed either by material bonding or by compression (non-positive joint) using a flexible solid gasket and an appropriate bolting system. A major trend in engine manufacture is the use of gasketing systems in engines that involve adhesive bonding to create an integral joint. In combination with a tailored metering and application system, Henkel is able to offer an automated process that is also suitable for large production quantities and capable of satisfying the highest quality demands can be offered.
Sealing rigid flange connections
The ideal solution for rigid flange connections is an anaerobic acrylate gasketing compound. This single-component sealant based on dimethacrylate ester is particularly suitable for torsionally stiff metal flange assemblies. Curing takes place in the absence of air and thus following the mating of the two flange faces. Because of its reaction mechanism the material is only suitable for metallic flanges. In addition, the brittleness of this high-strength solution has so far limited its use in more flexible constructions.
Based on an innovative formulation, a flexible anaerobic acrylate adhesive has now been developed. The new flange gasketing sealant (Loctite 5189) exhibits significantly improved elastic properties ?V particularly after temperature aging ?V making it suitable for less rigid joints and connections.
This innovative solution is already being applied in various Ford engines. For example, Loctite 5189 is used to seal the cam caps of the 1.0 liter EcoBoost engine, and also highly stressed joints in the 1.6 liter version from this OEM. The 125 PS (123 BHP/91 kW) single-liter engine, which is installed in the Ford models Focus and Fiesta (among others), was also the overall winner of the 2013 "International Engine of the Year Award."
Silicones for flexible flanges
Room temperature vulcanizing (RTV) silicone sealants are also used in engine construction as an alternative to anaerobic-curing acrylate gasketing compounds. This silicone group is characterized by high temperature and good chemical resistance. The high elasticity of silicone means that it is suitable for sealing flexible flanges subjected to large relative movement, and also surfaces exhibiting significant roughness or gaps. In addition, silicones adhere well to different plastic surfaces which, due to the increasing trend toward lightweight technologies, are being encountered more frequently in place of their metal equivalents.
With many hot oil-resistant RTV silicones, the curing process gives rise to the chemical compound methyl ethyl ketoxime (also known as MEKO) which is suspected of being hazardous to health.
This led to the development of the first oxime-free RTV silicone (Loctite 5970). This innovative product has no risk classification whatsoever (white material safety data sheet) and fulfills the ambition in sustainable development, occupational health and safety. While these oxime-free silicones are already in widespread use right across Europe, the switchover in America and Asia is still in its infancy. Here too, however, manufacturers are beginning to turn their back on oxime-containing solutions.
Sealing solution to aggressive chemicals
In addition to anaerobic gasketing sealant systems and silicones, there is even a third, advanced technology: liquid polyacrylates. The new RTV polyacrylate Loctite 5810, which is very similar in appearance and in application to its silicone counterparts, can be regarded as a better form of silicone because it also exhibits higher resistance to aggressive, synthetic transmission and hydraulic oils and is free of silicones and oximes.
With its chemical advantages over silicones, RTV polyacrylates thus open up new possibilities for engine construction. Unlike silicone-based gasketing sealants, which over time break down the foam-inhibiting additives in engine oils, polyacrylate-based sealing applications exhibit a neutral behavior, leaving the properties of the additives unimpaired. In addition to outstanding oil resistance, polyacrylate also exhibits a significantly lower degree of permeation to hydrocarbons. This means that gaskets and seals in the engine intake area can be made significantly more gas-tight, thus supporting manufacturers in the achievement of their own sustainability targets.
The advent of polyacrylate gasketing sealants, which are applied in liquid form, also opens up new areas of application in transmission unit manufacturing because liquid silicones are not sufficiently resistant to the new synthetic transmission oils. Until now, therefore, expensive solid gaskets have had to be used.
A glance into the future
The pressure in automotive engineering to meet general emission targets is also very apparent in engine manufacturing. More and more metal drive train components are being replaced by lightweight solutions involving plastics. In addition, new synthetic low-friction oils enable a further increase engine fuel efficiency. One of the side effects of this is that demands being placed on the associated gasketing sealant systems are increasing. In order to support and drive these trends, it requires the continuous development of new liquid gasketing materials to fulfill even future sustainability efforts.
Author: Georg Schubert, Business Director Automotive Adhesives within the Transport and Metal business, Henkel Adhesive Technologies.
Loctite is a registered trademark of Henkel in Germany and elsewhere.
Henkel operates worldwide with leading brands and technologies in three business areas: Laundry & Home Care, Beauty Care and Adhesive Technologies. Founded in 1876, Henkel holds globally leading market positions in both the consumer and industrial businesses with well-known brands such as Persil, Schwarzkopf and Loctite. Henkel employs about 47,000 people and reported sales of 16.4 billion euros and adjusted operating profit of 2.5 billion euros in fiscal 2013. Henkel's preferred shares are listed in the German stock index DAX.
View source version on businesswire.com:http://www.businesswire.com/news/home/20160523005087/en/
Echo Liu, + 86.21.28915832
Derek Jing, +86 21 2891 5853
KEYWORD: EUROPE ASIA PACIFIC CHINA GERMANY
INDUSTRY KEYWORD: MANUFACTURING AUTOMOTIVE MANUFACTURING CHEMICALS/PLASTICS AUTOMOTIVE GENERAL AUTOMOTIVE
Copyright Business Wire 2016
PUB: 05/23/2016 09:00 PM/DISC: 05/23/2016 09:00 PM